• Conveyor Belt Monitoring: New Technologies for the ...

    Rexline’s Rip Detection Systems represent the latest in acoustic-based longitudinal conveyor belt rip detection systems. Longitudinal rips are one of the most disruptive problems faced by operators of steel cord conveyor belting and Rexline’s acoustic-based systems have been providing reliable protection against these issues for many years.

  • Model BD-3 Belt Damage Detector - Bulk Pro Systems

    The belt rip monitoring system BRMS-WSR identifies inadmissible (positive or negative) changes in belt width which are interpreted by the control unit as blet rips. The belt width is captured via the axial deflection of the belt position sensors. An RFID-tag installed in the belt acts as synchronization point.

  • Emsys - Belt Rip Detection

    Belt Rip Detection Type BPS-A1 The BPS-A1 control was specifi cally developed for use in rough areas such as mining. This is a fully automated computer-supported belt rip detection system to monitor for lengthwise rips in steel belt and fabric belt conveyors.

  • Conveyor Components Model DB-100 Two SP/DT Damaged Belt ...

    If this time is exceeded (missing the expected value) the master switches off the motor drive and stops the belt. The rip detection system is used to detect longitudinal rips on predominantly steel cord conveyor belts and in very rare cases plied belting and to prevent greater damage to the belt by stopping the belt drives.

  • Conveyor Belting | Interflex conveyor belting

    The simple equation is that the faster the conveyor belt is stopped then the shorter the length of longitudinal rip damage will be. Using Rip Ranger in combination with breaker plies. Because rip detection systems use electromagnetic signals they cannot function if a steel breaker ply is fitted.

  • Belt Rip Detection | Conveyor Belting

    Bulldog - Conveyor Belt Alignment & Rip Detection Switch The Bulldog alignment and rip detection switch is an electro-mechanical system designed to detect dangerous belt misalignment and belt tear damage on open belt conveyors. The switch will detect horizontal misalignment of belts when contact is made with the roller; the roller arm will be forced to pivot by the belt activating a switch at ...

  • Rip Detection - Conveyor belt

    The next line of defence is to detect the rip and stop the conveyor running, to minimise belt damage length. BELT RIP DETECTION - VARIOUS DEVICES. There have been many methods introduced to attempt to minimise the length of a belt rip. These range from simple "home-made" mechanical trip switches to embedded antennae/elements in the belting.

  • Belt Guard® 10k Steel Cord Belt Rip Detector

    B&C Belting solutions provide and extensive range of conveyor belt monitoring systems. These products have been specifically designed for Mining Industry applications. ... To Barge the answer was simple he was tired of expensive Belt Rip Detection systems that continually failed and had little support from the suppliers. After spending ...

  • CBMI - Conveyor Belt Inspection, Rip Detection and Steel ...

    EagleEye is the most advanced combined rip detection and continuous belt monitoring system in the world. It is a permanently installed conveyor diagnostics tool designed for the analysis of splice condition, cord damage, rip detection and cord corrosion without the need to stop production on a steel cord conveyor system. rEscan®

  • Related Equipment | Conveyor Belt | Bridgestone Corporation

    Related Equipment Rip Sensor System - Intelligent Split Detection System - Operating Principle. Electromagnetic induction method. Transmitter and receiver sensors detect whether loop coils embedded in the bottom cover rubber of the conveyor belt have been cut.

  • Damaged Belt Detector / Belt Rip Detector | Conveyor ...

    Becker Mining Systems AG is pleased to announce the launch of its latest Belt rip detection System the BRS 2. The new Becker Belt Rip Detection System BRS 2 has been developed to help increase the productivity of conveyor belts by detecting belt rips as soon and as reliable as possible.

  • Coal Control

    Aug 29, 2017· The Becker Belt Rip Scanner System is used to detect longitudinal rips on steel cord & textile reinforced belt to prevent greater damage to the belt by stopping the belt drives. About 90% of belt tears usually occur at the loading point and is mostly provoked by foreign bodies or objects.

  • Bulldog - Conveyor Components

    Oct 30, 2012· Becker Belt Rip Detection version 2. Available now reading many of the standard loops.

  • B&C BELTING SOLUTIONS Belt Monitoring System Belt Rip ...

    Coal Control Belt Rip Systems can minimize a possible longitudinal slit at a limited distance and save you this trouble. Sensor Loops, which are vulcanized into the conveyor belt are analyzed with the help of the Belt Rip Detection systems and provide a possible shutdown to avoid a larger longitudinal slit and keep the economic damage as much as possible.

  • Rip Ranger® Belt Rip Detection | Fenner Dunlop

    Conveyor Components Model DB-100 Two SP/DT Damaged Belt Detector Switch and all other Conveyor Components safety items are available from Control Specialties, your …

  • Safety Controls | Conveyor Components Company

    The model BD-3 Belt Damage Detector switches are conveyor safety accessories designed to interlock with the conveyor shut down systems in the event of a damaged belt. They are mounted in pairs, one on each side of the belt with the cables crossing in the middle.

  • Becker Belt Rip Detection BRS2 - YouTube

    EagleEye® EagleEye® Belt Monitoring and Rip Detection The world leader in complete condition monitoring and high-end rip detection. A permanently-installed conveyor diagnostics tool designed for the analysis of splice condition, cord damage, and cord corrosion without the need to stop production on a steel cord conveyor system.

  • Launch of its latest Belt Rip Detection - System BRS 2 ...

    Rip Ranger Rip Ranger® Conveyor Belt Rip Detection The longitudinal ripping of conveyor belts is certainly not new. Such failures can occur with a fairly routine frequency. Historical references to catastrophic instances of belt ripping are well documented and remembered. One of the major risks for long custom-made belts (eg Drift and Overland belts) has …

  • Eagle Eye® Belt Monitoring & Rip Detection | Fenner Dunlop

    The CTS 700 RBL uses two downcast arms to detect misalignment of a return belt. Should the belt run off to the right or to the left to the extent that it can cause damage to the belt or the conveyor structure, it will come into contact with one of the downcast arms.

  • Rip Ranger – Steelcord belt rip detection - Dunlop ...

    Phoenix is a global leader in conveyor belt manufacturing. Along with a complete line of conveyor belts, we provide a range of tools needed for monitoring belt and splice conditions and minimizing rip and transverse tear damage, helping you reduce downtime.

  • Belt monitoring & rip detection systems - Dunlop Service

    Rip detection for conveyor belts. This is an old method where a wire is hanging under the belt. If a foreign body penetrates the belt and moves that wire in the running direction of the belt…

  • Belt Management | Becker Mining Systems AG

    Conveyor Belting Products. ... Belt Rip Detection. The Becker Belt Rip Scanner System is used to detect longitudinal rips on steel cord & textile reinforced belt to prevent greater damage to the belt by stopping the belt drives. About 90% of belt tears usually occur at the loading point and is mostly provoked by foreign bodies or objects.

  • Belt & Personnel Protection - Arch Environmental Equipment ...

    Rip Ranger® conveyor belt rip detection. The longitudinal ripping of conveyor belts is certainly not new. Such failures can occur with a fairly routine frequency. Historical references to catastrophic instances of belt ripping are well documented and remembered.

  • Diagnostic Products | Fenner Dunlop Americas

    CBM is a global convey belt monitoring organisation, overseeing many millions of kilometers of conveyor belting since the early 1980's. CBM is at the forefront of research and development delivering their longitudinal rip detection and vision and profile monitoring system.

  • Why you need Rip Detection

    Belt Rip Detection. The Becker Belt Rip Scanner System is used to detect longitudinal rips on steel cord & textile reinforced belt to prevent greater damage to the belt by stopping the belt drives. About 90% of belt tears usually occur at the loading point and is mostly provoked by foreign bodies or objects.

  • Continental Belt Monitoring Systems Conveyor Belt ...

    Conveyor Belt Rip Detection. Compatible with all belt brands. ... Based on Ultrasonic technology, the BG10k is a highly-sophisticated longitudinal, steel cord belt rip detector capable of detecting partial and full penetration rips without requiring any antennae or sensor loops embedded in the belt.

  • US8069975B2 - Conveyor belt rip detection system - Google ...

    Damaged Belt Detector / Belt Rip Detector. Click image to enlarge. Model DB. WHAT IS IT? The Model DB is a cable operated damaged belt detector that looks for punctures, tears, or protrusions through the conveyor belt and provides a means of automatic shutdown to limit the amount of damage to the conveyor belt. The output contacts of the Model ...

  • Industry Leading Belt Monitoring – Phoenix Conveyor Belt ...

    Belt Management / Conveyor Control. The Belt Rip Detection System BRS2 has been developed to help increase the productivity of conveyor belts by detecting belt rips as soon and as reliably as possible. It increases the productivity of conveyors through the immediate detection of belt rips at noticeable, monitored points.

  • RIP CONTROL Belt Rip Detection / Belt Monitoring ...

    Damaged Belt Detector / Belt Rip Detector The Model DB is a cable operated damaged belt detector that looks for punctures, tears, or protrusions through the conveyor belt and provides a means of automatic shutdown to limit the damage to the conveyor belt.

  • Rip Detection Systems - RexLine

    Longitudinal Rip Detection Belt Splice Monitoring 14 15 APPLICATION FIELD CONTI® MultiProtect is utilized by mining and industrial steel cord belt customers to minimize the damage associated with longitudinal rips. By stopping the conveyor belt upon detection of a longitudinal rip event, the system limits the damage associated with these ...